Page 1 of 1

Top X per Y - Unique Cross Sectional analysis

Posted: Tue Mar 11, 2014 1:43 am
by digitoll
Top X/Y Reports allow for a unique cross-sectional reporting analysis.

Top X/Y is very flexible and open to your imagination allowing unprecedented visibility of your network traffic. It can be used to provide simple 'birds-eye' view analytics such as "Show the Top 5 applications and Conversations for each ASN Peer" or more granular identification such as "Show the Top 100 Threat (IPs, Categories, Type) and for each Affected IP".

A simple example of a cross-sectional analysis is an analysis of the Top 10 Applications (X) for each hour (Y) over a Day. In this example (see figure1) below each Application is assigned a distinct color so that it can easily be identified within each hour

Image
figure1
The X/Y analytics that are available as Multiview Reports can be identified by the "/" in the Report title.

The graphic display of a Top X/Y is always a Stacked Bar Chart. The colors of the elements of the Stacked bar chart are the "X" items in the report. The "X" and "Y" cross-section can be made up of more than 1 field but there are always only two logical "X" and "Y" cross-sections
e.g. X(1,2) / Y(3,4,5,6)
The "X" elements are the granular details of each "Y" items in a report.e.g.
YXValue
Y1X19
X29
X39
Y2X19
The default X/Y reports or your own unique cross-sectional analytics can be accessed via the left menus or the right click menu. Where the right-click menu is used the meter measurement will follow the current meter sort order.

Image

The Filter allows the creation of a Top X/Y for any two or more fields.

Image

The Forensic screens Filter tab (below the graph) also provides access to the Top N control element enabling on the fly changes to Top N detail.

Image

Where more than 1 field is available the Top N control element provides the ability to change the cross-section.

Image

The Count algorithm is supported in Top X/Y where the X fields has 1 uncounted field.

Image

A number of default X/Y analytic templates are available in the Multiview and in the Forensic left menus. Some examples are shown below:

Security Forensics

Multiview

Flow Direction

Interface Routes

Routes and ToS
Account
Flow Detail

Business Group - Account

Image
IPv4

Image
Application

Business Group - CostCenter

IPv4
Application

ASN

Image
Dst. / Src.
Image
Src. / Dst.

Boundary Flow

Image
Application
Lower Port
Unknown Service
ToS Precedence
PHB Class

IPv4 Address

Image
Dst. / Src.
Src. / Dst.
IPv4 / Hour
IPv4 / Minute

Application

Image
IPv4/ICMP Type
IPv4/ICMP Code
IPv4 / App.
Talkers / App.
App. / Hour
App. / Minute

QoS

Image
Application / ToS
Application / DSCP
Application / PHB
Lower Port / ToS
Interface / ToS
PHB Class / Day
PHB Class / Hour

Forensics

Device

Next Hop

Image
Hop / Device
Device / Hop

IPv4 Addressz

Image
Dst. / Src.
Src. / Dst.
Talkers / Hour
Talkers / Minute

Packet Size

Pkt. Size/App.
App./Pkt. Size